The kit includes:
- The Transmitter(T434BH) and depth sensor
- R1H wireless display unit with 12V DC power adaptor. (100V AC - 240V AC)
- 6V lantern battery
- Detailed instruction
Features:
- Safe and easy to install
- Communication range up to 1000m(
line of sight).
- Transmitter can be installed up to 30m from tank.
- Monitor water levels to 4m
- Adjustable display update from once every
5 seconds to once every 30 minutes
- Adjustable alarm level (0 to 60% of max level)
- Level
display in 10% increments
- Log or capture water levels to a computer
- Accurate to 8mm over 4m, 2mm over 1m
- Transmitter can be powered by internal 6V Lantern
Battery, Solar panel or any other 12V DC source
-
Depth configurable in 2mm increments
-
Extended test and calibration features to assist in
installing and maintaining the system
- Audible low level alarm can be switched on or off
- Display uses bright Light Emitting Diode's(LED)
for level display and alarms. This means that the
display status can be seen from 8m away and may be
seen in the dark
- Optional RS232 interface to connect to a computer
- Optional 0 to 5 V analog adaptor for home automation and other analog applications (Available from June 2007)
Click here to see how the
Aquameta is installed
Note: The standard sensor cable is 4.5m. Select a longer cable option if
you are going to install the kit on a underground tank and you need to
located the transmitter away from the tank.
|
