• The Transmitter(T434B) and depth sensor
• R1 wireless display unit with 12V DC power adaptor. (100V AC - 240V AC)
• Detailed instruction

• Safe and easy to install
• Communication range up to 300m( line of sight).
• Transmitter can be installed up to 30m from tank.
• Monitor water levels to 4m
• Adjustable display update from once every  5 seconds to once every 30 minutes
• Adjustable alarm level (0 to 60% of max level)
• Level display in 10% increments
• Log or capture water levels to a computer
• Accurate to 8mm over 4m, 2mm over 1m
• Transmitter powered by 12v (Note power supply option below)
• Depth configurable in 2mm increments
• Extended test and calibration features to assist in installing and maintaining the system
• Audible low level alarm can be switched on or off
• Display uses bright Light Emitting Diode's(LED) for level display and alarms. This means that the display status can be seen from 8m away and may be seen in the dark
• Optional RS232 interface to connect to a computer
• Optional 0 to 5 V analog adaptor for home automation and other analog applications (Available from June 2007)

Click here to see how the Aquameta is installed
Note: The standard sensor cable is 10m. Select a longer cable option if you are going to install the kit on a underground tank and you need to located the transmitter away from the tank.