|
Anadex Labs Pty Ltd :: Aquameta products
How does AQUAMETA work ?
AQUAMETA uses a differential pressure sensor, suspended into the water tank. This pressure sensor measures the depth of water in the water tank. The deeper the water, the higher the pressure reading.
This pressure sensor is connected to the AQUAMETA Tank Unit. The Tank Unit is installed on the top of the water tank. At time of installation the Tank Unit is calibrated using a dial in the Tank Unit so that it knows the maximum water depth to monitor. Using this technique ensures that a reading, accurate to within a couple of mm, can be achieved. When measuring the level of water in the tank, the Tank Unit takes a pressure reading. This pressure reading is converted and compared to the maximum depth. A % reading is calculated and then transmitted to the AQUAMETA display unit which can be located up to 300m away (
line of sight). The water level is displayed on a 10 element LED bar graph.
| Aquameta products |
|
Click here for more information
|
AN5000B Wireless Liquid Level Indicator Kit
SKU: ANR15K
Easy to install wireless water tank gauge kit. This gauge is suitable for all types of tanks including underground tanks. It can monitor tanks to 4m(10m option) in depth and the wireless display unit can be 300m away( 1000m option). Optional RS232 output available. 12v AC
Our price: AUD 478.50
including GST 10.00% (AUD 43.50)
|
|
Click here for more information
|
AN5000I Liquid Level Indicator and Alarm
SKU: AN5000I
AN5000I is a easy to install liquid level indicator and alarm. Suitable for underground and above ground tanks to 4m (10m option available). Optional wireless transmitter and RS232 interface. Internal relay with voltage free SPDT contacts (5A). Suitable for switching low voltages ( <30V). Uses 12...
Our price: AUD 480.70
including GST 10.00% (AUD 43.70)
|
|
Click here for more information
|
AN6000I Liquid Level Indicator and Controller
SKU: AN6000I
AN6000I is a easy to install liquid level indicator and level controller. Suitable for underground and above ground tanks to 4m (10m option available). Optional wireless transmitter and RS232 interface. Internal relay with voltage free SPDT contacts (5A). Suitable for switching low voltages ( <30...
Our price: AUD 579.70
including GST 10.00% (AUD 52.70)
|
|
Click here for more information
|
Aquameta 420-15 4-20mA level probe (10m depth range)
SKU: AN420-15
The AN420 series of water level probes are a cost effective and reliable solution designed for continuous water level measurement where a 4-20mA output is required. The probes are temperature and barometric pressure compensated. Reverse and overvoltage protection is included. The AN420-15 is sui...
Our price: AUD 485.10
including GST 10.00% (AUD 44.10)
|
|
Click here for more information
|
AQUAMETA AN4020 4-20mA loop powered level indicator
SKU: AN4020
The AN4020 is a 4-20mA loop powered indicator with battery backup. This level indicator provides a local level reading at the tank whilst at the same time supplying a 4-20mA signal. In the event of the 4-20mA loop power being lost, a local reading of the tanks contents can be obtained by pressing...
Our price: AUD 341.00
including GST 10.00% (AUD 31.00)
|
|
|
|
|
