|
Anadex Labs Pty Ltd :: Aquameta products
How does AQUAMETA work ?
AQUAMETA uses a differential pressure sensor, suspended into the water tank. This pressure sensor measures the depth of water in the water tank. The deeper the water, the higher the pressure reading.
This pressure sensor is connected to the AQUAMETA Tank Unit. The Tank Unit is installed on the top of the water tank. At time of installation the Tank Unit is calibrated using a dial in the Tank Unit so that it knows the maximum water depth to monitor. Using this technique ensures that a reading, accurate to within a couple of mm, can be achieved. When measuring the level of water in the tank, the Tank Unit takes a pressure reading. This pressure reading is converted and compared to the maximum depth. A % reading is calculated and then transmitted to the AQUAMETA display unit which can be located up to 300m away (
line of sight). The water level is displayed on a 10 element LED bar graph.
| Aquameta products |
|
Click here for more information
|
VA420J vented junction box with trimpot
SKU: VA420J
The VA420J vented junction box is suitable for use with the VA420 adjustable level probes.
The vented junction box features a permeable membrane to vent the sensor cable and has a printed circuit board with a 500ohm trimpot that can be used to calibrate the probe output.
Screw down te...
Our price: AUD 88.00
including GST 10.00% (AUD 8.00)
|
|
Click here for more information
|
Dual Water/top-up kit with wireless level display
SKU: ANTOPR1
This kit contains all the components to implement a dual water system and includes level display.
T434R Tank Unit and Depth Sensor
Weatherproof 12V 60VA mains power adaptor
Solenoid valve, 12V DC, Watermark approved
7M twin core cable
Application Note - Imple...
Our price: AUD 594.00
including GST 10.00% (AUD 54.00)
|
|
Click here for more information
|
AQUAMETA RS232 Adaptor
SKU: ANRS232
The Aquameta RS232 adaptor is ideal for logging water tank level to a computer or SCADA system.
Add the RS232 to USB converter (SKU code - ANUSB) to use the USB interface on a computer if a serial port is not available.
Our price: AUD 88.00
including GST 10.00% (AUD 8.00)
|
|
Click here for more information
|
AQUAMETA R1 Command Module
SKU: ANR1
The R1 Command Module is an attractive, slim line wireless display receiver. Must be used in conjunction with the AN5000 or AN6000 level transmitters. Displays the level on a bright 10 element LED. 240v to 9V mains power adapter included.
Our price: AUD 154.00
including GST 10.00% (AUD 14.00)
|
|
|
|
|