|
|
|
|
|
|
|
|
|
|
This Shop is powered by |
 |
|
Fast, Easy and Secure |
|
|
|
| |
|
This shop does require active
components to be enabled on your web browser. Review your browser's
security setting if the shop does not function. |
|
|
|
|
|
|
|
ANTOPK - Dual water,
Top-Up Kit - 240V Ideal for topping up rainwater
tanks from mains |
 |
This kit contains all the components to implement a dual water top up system.
This kit contains the following: |
 |
T434R Tank Unit and Depth Sensor |
|
Weatherproof 12V 60VA mains power
adaptor |
|
Solenoid valve, 12V DC, Watermark approved
More Info |
|
7M twin core cable |
|
Application Note - Implementing a Top Up system using the T434R |
|
|
|
|
|
| |
|
ANTOPR1 - Dual water, Top-Up
Kit with wireless water level display |
 |
| This kit contains all the components to implement a dual water system and includes level
display. |
|
T434R Tank Unit and Depth Sensor |
|
Weatherproof 12V 60VA mains power
adaptor |
|
Solenoid valve, 12V DC, Watermark approved
More Info |
|
7M twin core cable |
|
Application Note - Implementing a Top Up system using the T434R |
|
R1 Command Module and
mains power adaptor |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Water Tank Level
Sight Tube
|
|
ANST3 - Water Tank Level Sight Tube Indicator -
to 3m (32mm fittings) |
 |
|
Sight
tube indicator kit |
| |
|
Display Water Level to 3m |
| |
|
Built
in flow restrictor to limit water loss
if tube is damaged |
|
|
|
|
|
|
Power suplies -
Note to International
Customers
The
AQUAMETA
R1 and R5 Command Modules can use 9V to 24V AC or DC. Power is
supplied via a plug from the power adaptor (see image to the
right; outer diameter of plug - 5.5mm, inner diameter - 2.1mm)
Small mains power adaptors (60mA or greater) that will convert your
mains voltage to any of the voltages above, should be readily
available from any local toy, electrical or electronics shop.
Choose one that comes with a selection of interchangeable
plugs. One of them will match the plug on the Command Module.
Adaptors
are priced at about USD$4.00. (The mains adaptor unit should look similar to the
AN121 shown below - your mains prongs will be different.) |
 |
AQUAMETA Tank Units
The T434B Tank units can be powered by:
| |
6 V
Lantern battery (installed internally) |
| |
9 to 24V
DC external power source such as Solar panels, car batteries
or mains power adaptors. |
|
The T434R
Tank Units can be powered by: |
| |
9 to 12
DC external power source such as Solar panels, car batteries
or mains power adaptors. |
| |
(Note: by
replacing the 12V relay with a 24V DC relay, the T434R can
then also be powered by 24V DC |
|
|
| |
|
|
|
AN122WS - Solar power kit - Suitable for
the T434B Tank Unit |
 |
Solar power your
T434B Tank Unit with this kit.
Kit Includes: |
|
Solar Panel 12V 2W |
|
Battery Regulator |
|
12V 1.2Ahr Sealed
Rechargeable Battery |
| |
|
|
|
|
|
| |
|
ANI121 - 240V AC to 9V DC 100mA
mains power adaptor |
 |
Indoor 240V AC to 9V DC 100mA power
adaptor. Suitable for use with the R1 and R5 Command Units. (Note: This power
pack is shipped standard with the R1 and R5 Command Modules in Australia.)
Can also be used to power the T434B Tank Units. |
|
| |
|
ANW1260 - 240V AC to 12V
DC Outdoor rated mains power adaptor |
 |
Weatherproof 240V AC to 12V DC 60VA power
adaptor. Suitable for use with the T434B and T434R Tank Units where mains
power is available at the tank. |
|
| |
|
|
|
|
|
| |
|
|
| |
